CougarDB

Owner's Manuals

 

Other Useful Guides

  Chilton's Total Car Care Repair Manual, Ford Contour, Mystique and Cougar, 1995-99

Publisher Description
"The Total Car Care series continues to lead all other do-it-yourself automotive repair manuals. This series offers do-it-yourselfers of all levels TOTAL maintenance, service and repair information in an easy-to-use format. Each manual covers all makes format. Each manual covers all makes and models, unless otherwise indicated. Based on actual teardowns Simple step-by-step procedures for engine overhaul, chassis electrical drive train, suspension, steering and more Trouble codes Electronic engine controls."


Click Here for More Info


  Haynes Repair Manual, Ford Contour & Mercury Mystique 1995 thru 2000

Publisher Description
"Bolt by bolt, and shot by shot, Haynes tears down the engines of brand new cars to build a step-by-step procedure for maintaining and troubleshooting your vehicle. Its manuals cover routine maintenance; tune-up procedures; engine repair; cooling and heating; air conditioning; fuel and exhaust; emissions control; ignition; brakes; suspension and steering; electrical systems and wiring diagrams."


Click Here for More Info



10 More...

FAQs

    Where can I pull ground from for an amp in the trunk?
  • The ground wire can be mounted to anything metal. You can screw it right into the trunk if you want. Just be sure to check under the car first so you don't screw into the gas tank or anything else important.
    + Show Answer
  • Where do I get the aftermarket adapter for a new faceplate and how much?
  • Any stereo shop will probably sell them. They go for about $16 from Best Buy and Circuit City.
    + Show Answer
  • I press my cabin trunk-release button, and the hatch won't open! Is it broken? The dealer keeps saying no!
  • Ensure that your doors are unlocked before you press the trunk-release button inside the cabin of the vehicle. The trunk does not seem to release (safety feature?) when the doors are locked. (Sorry, seen alot of people run into this problem.)
    + Show Answer
  • How do I reprogram my keyless entry?
  • Cycle the ignition from OFF to RUN 4 times within six seconds, then turn it back to OFF. The alarm light will stay on to confirm programming mode. Press any button on the first transmitter. Alarm light will flash to confirm transmitter programmed. Press any button on second transmitter. (Up to four transmitter total possible) Turn ignition to ON. Alarm light will turn off to confirm end of programming mode. If you car didn't come with remote keyless entry, then I don't know if this will work. If it did, but you just didn't get a transmitter, then it should work.
    + Show Answer